Men have been using orthopedic devices for penis enlargement for more than a decade, and they have proven positive. The most widely used device is the so-called expander, which is translated into English as expander or filler. This fully reflects its purpose. It is characterized by simplicity of design and assembly, which allows men to use both purchased (factory) and homemade extensions. It's pretty easy to make. The main thing is that they have a basic knowledge of the necessary materials and the mechanics of the intimate apparatus.
Types and effects of extenders
The device works on the principle of the proliferation of cavernous bodies. This occurs in addition to the regular tension of the tissues, as a result of the periodic unwinding of the shafts in the direction of increasing length. The growth of new tissues does not stop, the cells divide under the influence of the disturbing force.
Average growth rates, according to users and the manufacturer, mean an increase in length of 2-5 centimeters in 6-10 months. You should not expect immediate results. Patience and regular use of the extension cord will be required. Violation of this recommendation will result in failure of the desired effect.
Extensions are divided into several types depending on the method of attachment. If you plan to build a home version, you need to understand how they differ from each other.
Vacuum extension
The circumference is performed using a special vacuum chamber. It covers the head of the penis with a circumference of about 3-7 centimeters. It is considered the most reliable and safest. The risk of injury is virtually reduced to zero as there is no risk of compression.
Extender for penis enlargement
Loop and strap extension
The mechanics of the attachment are almost the same, but the form of attachment is different. In the first case, a loop is used, and in the second, a strap. The difference gives these species a significant difference.
The strap is lined with gauze, so the amount of compression is minimal. The loop, on the contrary, can strongly compress the head, disrupting the blood supply to the reproductive organ, but it remains the most common option.
How to make an extension cord with your own hands at home?
You can make any of the three types of devices listed. The most difficult part is manufacturing the vacuum, as you need to make a chamber. Otherwise, the process will not make a significant difference.
Drawings
Make your own schematic diagram of the device. To make a drawing, it is enough to study the design of any well-known manufacturer. They outline their sketch based on a photo, drawing, or video. The length of the side columns is selected based on the desired result. It can vary between 20 and 25 centimeters.
Necessary materials and tools
The homemade extension is assembled from the same parts as the factory one. The specific materials depend on the type of structure being assembled:
- The stop ring, straps and loops are in direct contact with the skin and cannot cause an allergic reaction. This places certain requirements on the material. The ring can be made of thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the cross-sectional width of the penis. Before use, it is best to use a sterile dressing that is changed each time.
- Slats (side bars) are selected so that they can fix the required length for a long time. These can be stickers, bars, chrome spokes.
- The vacuum chamber and bulb must be sealed. If this condition is not met, then such a homemade product will not work.
The difference between the devices lies in the fastening element. If you decide to make a version with a camera, then do not give preference to a plastic bottle, as some sources write, but to purchase a special jar. These are sold in pharmacies. This guarantees the creation of an internal vacuum.
Schematic homemade extension cord
Step-by-step assembly instructions
The production of a sling or loop device includes the following work processes:
- Cut a piece with a diameter of 11 cm from plywood or other material no thicker than 10 mm. A hole with a diameter of at least 5. 5 cm is made inside the penis.
- The length of the rods is 20-30 cm. It is completely screwed into the plywood, leaving a little on top. The entry points are filled with glue.
- A "lamb" is screwed onto each one.
- Strips are cut from a thin metal sheet and holes are made in them.
- A clamp made of soft tubing or a strap, which can be used as a medical wide tourniquet, is inserted into the holes.
- Check the reliability of the recording.
The assembly of the vacuum type differs only in that a jar with a pear is attached to the end. Not everyone has such a device at home, but it is freely sold in city pharmacies. The radius is 13-25 mm. It is selected according to the size of the reproductive organ. The tightness of the clamp is ensured by a rubber sleeve. Its length is at least 6 cm. It can be made from elastic surgical gloves.
The air is pumped out thanks to a bulb or a hose connection. You can use the tonometer item. The shut-off valve is unscrewed from it and inserted from the other end. This makes it possible to change the operating principle. The pear pumps out more than air. As you can see, there's more to tinkering with than a strap and loop device.
In order to understand the principle of assembling an extension cord at home with your own hands, a video will help, which clearly shows how to connect the elements, as well as what materials they are made of.
Extender for penis enlargement - tied below the knee
How and when should it be used?
An indication of the device's use is its small size (10-12 cm). This length is not a "reference" length. You decide for yourself whether you are satisfied with your penis or want more. To increase the size of the phallus, you need to wear a homemade or factory-made device for at least 4-6 hours a day. The design allowsto hide the extension cord under clothing. Those around you will not notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit snugly against the pubic bone.
- The foreskin is retracted and a camera, loop, or strap is attached to the glans. Make sure that the blood flow is not disturbed (there is no excessive pressure, the shade of the skin changes).
- Adjust the length of the bars. It should not be a painful sensation. The parameter gradually increases, allowing the organ to get used to the degree of tension, that is, the phallus is trained.
If possible, massage the penis every hour. This allows him to quickly adapt to the loads. After the specified time, the device is removed and the meat is kneaded with special intimate creams. The device is thoroughly disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a home stretcher include the following parameters:
- possibility to try the stretcher without purchasing a device;
- relative cheapness;
- obtaining a design that fully meets the parameters of the phallus.
It actually has very few advantages. It has more disadvantages. Among them is the inconvenience of the product, since it is quite difficult to independently assemble a model that ideally twists, puts on, takes off and does not press anywhere and does not slide down.
Which extension is better - factory or homemade?
To answer this question, it is sufficient to compare the two model types:
- A homemade product weighs much more than factory models. This leads to the fact that the rods have to be adjusted for a long time each time so as not to compress the head of the penis. Another point is that it is quite difficult to make a vacuum model. Otherwise, it is generally less effective than homemade loop and strap.
- The cost mentioned as an advantage is a relative advantage. Today there are Chinese models, the price of which is 1-3 thousand rubles. It's no more expensive than a homemade extension. No one will sell half a meter of hairpins or 20 centimeters of textolite. You will have to buy a lot more material that will lie idle. This makes it profitable to assemble the device yourself only if you already have everything you need.
- The simplified design of the self-assembled device is not an advantage, but a disadvantage, as it will be inconvenient to use. It takes a lot of time to put it on and take it off, and considering that self-massage is recommended periodically, it is less effective.
One conclusion can be drawn - the factory device is better. To try this method of penis enlargement, simply buy a cheap model
What are the risks of using a homemade device?
Experts and experts do not recommend assembling an extension cord yourself without proper skills. If the device turns out to be "clumsy", marks, traces, causes discomfort, it is strongly not recommended to wear it. This can lead to unpleasant consequences.
Homemade extension cord
A well-assembled device will not be worse in efficiency than the factory one. It just won't be aesthetically appealing. Otherwise, there will be no difference, but here there is also a nuance. Many users write that with long-term use, hematomas, compactions and irritations develop on the dermis.
This may be due to low-quality materials. It is almost impossible to find medical silicone in the pharmacy. If one is sold, its properties leave a lot to be desired, and with prolonged contact there are negative consequences.